|Oxford Paints Fast set Admixture for fly ash bricks is a compound formulated specifically for Fly ash bricks industries to give fast results at the same time minimalizing the breakage at an economical cost like no other.
At present fly ash brick industry is a highly potent and booming industry due to the eco-friendly nature and reuse of fly ash that is readily available in most parts.
Usually, the raw material or input consists of –
1.Fly ash + cement + stone dust/river sand
2.Fly ash+ Lime + stone dust /river sand
Fast set competent for both the above mixtures it reacts with cement/lime and helps in fast binding.
250-400 gram per 50 kg bag of grey cement.
2.Available in 230 kg and 60 kg drums
3.Poly Carboxy Ether (PCE) based compound along with specialty catalysts to enhance the reaction process. Highly recommended
Pre-dilute with water and then pour into the cement mixture. For best practice cover the bricks with tarpaulin in order to facilitate self-curing.
|Oxford Paints Admixture- 401 grade is specifically designed for paver block and cement pre-casting and is Poly carboxy ether (PCE) based which is a proven advancement in the chemical world. 401 Admixture by Oxford Paints is a highly powerful concentrate compound and great results can be achieved with a comparatively lower dosage.
At present Paver, block industry is booming and so are the chemical for hardening but it is essential to have an overall knowledge of recent developments.
401 Admixture is PCE based admixture blended with catalysts that not only helps in fast strengthening but also a smooth finish that minimizes the breakage.
60-70 gram per 50 kg bag of grey cement.
It is however recommended to use 90-95 grams in the rainy season
Low dosage compared to others thereby economical.
Smooth and shiny surface thereby less breakage.
Acts as Water reducing agent i.e. less water absorbed by cement
Poly Carboxy Ether (PCE) based compound along with speciality catalysts to enhance the reaction process. Along with speciality catalysts for a smooth and shiny finish. Highly recommended
Available in 60 kg and 230 Kg HDPE drums.
Pre-dilute with water and then pour it into the cement mixture.
|Water-Based tile lacquer is one of its kind economical industrial coating solutions for a cementitious surface having gloss equal to that of enamel. This product has rapid drying technology and water thinable saving cost invested in expensive solvent thinners.
Oxford tile lacquer is newly developed water-based coating primarily designed for cement surfaces. It is based on high mechanical strength polymer for application on cement surface in order to give a glossy and tough finish. The paint is resistant to ultra violet radiations including resistance to dust, water, algae and abrasion also withstanding in tough weatherly conditions resulting in long life.
It saves cost invested in expensive solvent base thinners Can be sprayed after tiles are laid hence saving time.
Takes less than 15 minutes to dry under sun.
Has a coverage of 150 Sq. ft per litre per coat i.e., twice the coverage of
that of enamel.
The polymer in the lacquer has ability to fill inside voids of cement surface.
Unlike enamel water-based tile lacquer does not peel off.
Suitable for application in airports as this is non inflammable unlike solvent based enamel.
Just add 200ml of clean portable water to 1 litre of lacquer in a sprayer and spray or apply using a sponge.
Usually, the lacquer is compatible with all kinds of the cement surface.
Can be used as curb paint in highway, Cement chair, table, and columns installed in parks Cement milestones
Terracotta (for tiles)
Orange nectar (For premium looking tiles)
Black white yellow (for tiles, kerb and milestones)